Huawei S5700-28C-EI-24S-AC Switch

S5700-28C-EI-24S-AC

SKU: S5700-28C-EI-24S-AC Category: Brand: ,

Enterprise stock · tested · export documentation available

Huawei S5700-28C-EI-24S-AC – Product Information

Product Overview

The Huawei S5700-28C-EI-24S-AC is a next-generation, energy-saving Gigabit Ethernet switch developed to meet the demands of high-bandwidth access and Ethernet multi-service aggregation. As a managed Layer 3 switch, it is designed for enterprise campus networks, SMB aggregation, and secure departmental networking, delivering robust performance, flexible fiber connectivity, and enterprise-grade reliability.

The switch features 24 Gigabit SFP ports, 4 of which are dual-purpose combo ports that can operate as either 10/100/1000BASE-T electrical ports or 100/1000BASE-X optical ports. It provides 2 extended slots—one for an uplink subcard and the other for a stack card—enabling flexible uplink expansion and stacking capabilities. With a switching capacity of 256 Gbit/s and a forwarding performance of 96 Mpps, the S5700-28C-EI-24S-AC delivers wire-speed forwarding for high-density Gigabit access scenarios.

The switch supports comprehensive Layer 3 routing features including static routing, RIPv1/v2/RIPng, OSPF/OSPFv3, IS-IS/IS-ISv6, BGP and BGP4+, as well as ECMP. It also offers extensive IPv6 capabilities, multicast features (IGMP snooping v1/v2/v3), and advanced reliability mechanisms including RRPP, Smart Link, SEP, ERPS (G.8032), STP/RSTP/MSTP, and BFD for various protocols. The switch is powered by a 150W AC power supply and supports dual power module slots for power redundancy.


Technical Specifications

Category Specification
Product Code S5700-28C-EI-24S-AC
Part Number 02358312
Device Type Managed Layer 3 Ethernet switch
Fixed Ports 24 GE SFP ports, 4 of which are dual-purpose 10/100/1000BASE-T or 100/1000BASE-X combo ports
Extended Slots 2 slots (1 for uplink subcard, 1 for stack card)
Switching Capacity 256 Gbit/s
Forwarding Performance 96 Mpps
MAC Address Table 32K MAC address entries
VLAN Features 4K VLANs; Guest VLAN and voice VLAN; VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports; 1:1 and N:1 VLAN Mapping; SuperVLAN
IP Routing Static routing; RIPv1, RIPv2 and RIPng; ECMP; OSPF, OSPFv3; IS-IS, IS-ISv6; BGP and BGP4+
IPv6 Features Neighbor Discovery (ND); Path MTU (PMTU); IPv6 ping, IPv6 tracert, and IPv6 Telnet; ACLs based on source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type; MLD v1/v2 snooping; 6to4 tunnel, ISATAP tunnel, and manually configured tunnel
Multicast IGMP v1/v2/v3 snooping and IGMP fast leave; Multicast forwarding in a VLAN and multicast replication between VLANs; Multicast load balancing among member ports of a trunk; Controllable multicast
Reliability RRPP ring topology and RRPP multi-instance; Smart Link tree topology and Smart Link multi-instance (millisecond-level protection switchover); SEP; ERPS (G.8032); STP, RSTP, and MSTP; BPDU protection, root protection, and loop protection; E-Trunk; BFD for OSPF, IS-IS, VRRP, and PIM
Power Supply 150W AC power module (1 AC module equipped, supports dual power slots)
Power Voltage AC 100-240V, 50/60Hz
Power Consumption < 63W
Dimensions (W x D x H) 442.0 mm × 420.0 mm × 43.6 mm (17.4″ × 16.5″ × 1.72″)
Weight 4.8 kg
Memory DDR: 256 MB; Flash: 32 MB
Switching Mode Store-and-forward
Stacking Supported
Subcards Supported 4 × 1000Base-X SFP subcard; 2 × 10 GE SFP+ subcard; 4 × 10 GE SFP+ subcard

Reviews

There are no reviews yet.

Be the first to review “Huawei S5700-28C-EI-24S-AC Switch”

Your email address will not be published. Required fields are marked *